Specifications: 

3 packing widths, 8 different models to choose from

WR75 Series3 Walk 'n' Roll packer/roller

• 75" packing width
• Heavy 12" X 6" single beam main frame with high arch gooseneck
• Five heavy duty independent walking beams
• 2" X 12" hardened steel pivot pins
• Five inches of bushing
• Ten easy access 7.50 X 15 smooth rolller tires
• Individual 6,000 lb. hubs
• Five easy to reach grease zerks
• Machine weight not to exceed 3,000 lbs
• Manufactured in the United States of America

WR90 Series 3 Walk 'n' Roll packer/roller 

• 90" packing width
• Heavy 12" X 6" single beam main frame with high arch gooseneck
• Six heavy duty independent walking beams
• 2" X 12" hardened steel pivot pins
• Five inches of bushing
• Twelve easy access 7.50 X 15 smooth roller tires
• Individual 6,000 lb. hubs
• Six easy to reach grease zerks
• Machine weight not to exceed 3,500 lbs
• Manufactured in the United States of America

Walk 'n' Roll build a WR75-30R that has the same specifications as a WR75 except it has a 30" RH Hydraulic Side-Shift

WR105 Series 3 Walk 'n' Roll packer/roller 

• 105" packing width
• Heavy 12" X 6" single beam main frame with high arch gooseneck
• Seven heavy duty independent walking beams
• 2" X 12" hardened steel pivot pins
• Five inches of bushing
• Fourteen easy access 7.50 X 15 smooth roller tires
• Individual 6,000 lb. hubs
• Seven easy to reach grease zerks
• Machine weight not to exceed 4,000 lbs
• Manufactured in the United States of America

WR90 Series 3 Hydra-Slide Walk 'n' Roll packer/roller 

• 90" packing width
• Heavy 12" X 6" single beam main frame with high arch gooseneck
• Six heavy duty independent walking beams
• 2" X 12" hardened steel pivot pins
• Five inches of bushing
• Twelve easy access 7.50 X 15 smooth roller tires
• Individual 6,000 lb. hubs
• Six easy to reach grease zerks
• Machine weight not to exceed 3,800 lbs
• 24" Right or Left Hydraulic Side-Shift
• Manufactured in the United States of America

Walk 'n' Roll build a WR90R-36 that has the same specifications as a WR90RL-24 except it has a 36" RH Hydraulic Side-Shift 

WR90 Series 3 Walk 'n' Roll Oscillator 

• 90" packing width
• Heavy 12" X 6" two piece sub frame with high arch gooseneck
• Six heavy duty independent walking beams
• 2" X 12" hardened steel pivot pins
• Five inches of bushing
• Twelve easy access 7.50 X 15 smooth roller tires
• Individual 6,000 lb. hubs
• Six easy to reach grease zerks
• Machine weight not to exceed 3,450 lbs
• Manufactured in the United States of America

Parallel Lift Assembly in lieu of a rear ripper 

• Must be parallel lift so all tires make contact with road surface at the same time
• Must have Quick-Attach for removal of the packer from the lift assembly
• Must mount to the grader without welds or holes to drill
• Must have an accumulator capable of setting to a minimum of 1,000 psi
• Lift cylinder must have a burst pressure of 6,000 psi
• Manufactured in the United States of America.

We build a Hydraulic Side-Shift for a WR90 Series 3 Walk 'n' Roll Oscillator for large motor graders like a 14G, H or M Caterpillar or equal.

[Back to Top]